Safeguard Community

Forum adding RAM to the SPP virtual appliances

adding RAM to the SPP virtual appliances

dario guastella over 1 year ago

is it possible to add ram to the virtual appliances of SPP?

which is the best practice?

thank you a lot

Parents

0 Tawfiq.Ahmad over 1 year ago

Hi Dario,

Yes you can increase the RAM on the SPP VM appliances.

I would match the HW specs which normally ship with 32 GB of Memory minimum

Thanks!
Cancel
Up 0 Down

Reply

Verify Answer

Cancel
0 dario guastella over 1 year ago in reply to Tawfiq.Ahmad

ok Tawfiq, thank you. Just the last fast question. Can this be done with vm active? must they be restarted after the ram increase? Or can ram be added with 'hot change'? please let me know if there are any specific details to follow. Thank you so much!
Cancel
Up 0 Down

Reply

Verify Answer

Cancel
0 Tawfiq.Ahmad over 1 year ago in reply to dario guastella

Hypervisors require VM appliance to be powered off to increase the RAM then you can power up after the VM settings are updated.

Example notes from VMWare KB:
---

Note: In all cases, ensure that the virtual machine is powered off before increasing the amount of memory assigned to it.

Note: Once the memory assigned to the virtual machine has been increased, it will be immediately available within the guest operating system. No other manual changes or configurations should be needed.

Reference: https://kb.vmware.com/s/article/1004059#:~:text=Click%20the%20entry%20for%20the%20virtual%20machine%20from%20the%20Window,amount%20of%20memory%20as%20required.

---

This is needed on each appliance being updated.

Thanks!
Cancel
Up 0 Down

Reply

Verify Answer

Cancel

Reply

0 Tawfiq.Ahmad over 1 year ago in reply to dario guastella

Hypervisors require VM appliance to be powered off to increase the RAM then you can power up after the VM settings are updated.

Example notes from VMWare KB:
---

Note: In all cases, ensure that the virtual machine is powered off before increasing the amount of memory assigned to it.

Note: Once the memory assigned to the virtual machine has been increased, it will be immediately available within the guest operating system. No other manual changes or configurations should be needed.

Reference: https://kb.vmware.com/s/article/1004059#:~:text=Click%20the%20entry%20for%20the%20virtual%20machine%20from%20the%20Window,amount%20of%20memory%20as%20required.

---

This is needed on each appliance being updated.

Thanks!
Cancel
Up 0 Down

Reply

Verify Answer

Cancel

Children

No Data